Changes between Version 5 and Version 6 of CSPFL_usbwifi

Author:

rasmusto (IP: 67.169.209.20)

Timestamp:

11/03/09 15:42:34 (3 weeks ago)

Comment:

--

CSPFL_usbwifi

@@ -24 +24 @@
-'''Step 3: Connect to wireless network:'''
-
- Wicd currently can only be configured to work with unencrypted networks, such as OSU_Access.
+
-Before attempting to connect to OSU_Access, make sure you have registered the mac address of the USB wifi adapter you plan to use.  The easiest way is to use the wireless adapter on a computer with a web browser, and follow [http://oregonstate.edu/wireless/ these instructions].  Make sure you register the mac address of the USB adapter, and not a built in adapter.
-
-The list of available networks should appear, find your wireless network, and click 'Connect'.
-
-
+  NOTE: currently this method can only be used to connect to unencrypted networks.
-
-'''Option 2: ncurses interface:'''
-
-You can also change advanced settings for each network by highlighting it and pressing the right arrow key (right on the joystick).
+
+If your network has encryption enabled (WEP/WPA/WPA2), enter the configuration menu for the network, and scroll to the bottom of the list.  Ensure that the check box labeled "Use Encryption" is checked (press the space bar when it is highlighted if not).
+
+On the next line, specify the type of passphrase/key your network uses, and enter it in the following line.  Press Alt+Enter to exit this menu and save changes.
+
+'''NOTE:'''
+
+Wicd does not currently set up DNS servers properly, this is a known issue and will be fixed in an upcoming release.