[http://beaversource.oregonstate.edu/projects/cspfl Main] -> [wiki:CSPFL_Software Software Overview] -> [wiki:CSPFL_U-Boot U-Boot]
[[PageOutline]]
----
= U-Boot =
The U-Boot source is maintained is the oswald-u-boot git repository found at [https://code.oregonstate.edu/git/oswald-u-boot].

== Check out the source code ==
Run the following command to check out the oswald-u-boot git repository:

{{{
#!sh
git clone git://code.oregonstate.edu/oswald-u-boot
}}}

== Build Process ==
To configure u-boot for the OSWALD, enter the oswald-u-boot directory and run the following command:

{{{
#!sh
CROSS_COMPILE=arm-radix-linux-gnueabi- make omap3_oswald_config
}}}

This assumes you are using the cross-compile toolchain provided with the SDK otherwise you should change the CROSS_COMPILE variable to the CTARGET of your cross-compile toolchain.

To cross-compile u-boot for the OSWALD using the following command:

{{{
#!sh
CROSS_COMPILE=arm-radix-linux-gnueabi- make
}}}

If the build process completed successfully the outputted u-boot.bin file should be able to be used as the bootloader for the OSWALD.